How to clean film adhesive

Before applying new insulation film to car windows, it is necessary to peel off the old film layer and clean the glue layer. Because the remaining film adhesive layer creates slime and loses the aesthetics of the insulation film after pasting. So how to clean old insulation film adhesive stains? Tell you how to properly clean film adhesive on car windows. Find out details in the following article!
 

 

Leftover window film adhesive can make the surface look unsightly and make the car glass susceptible to dirt. Additionally, it can also reduce visibility while driving. Therefore, cleaning the adhesive is necessary to maintain the beauty and functionality of car  glasses.

How to clean insulation film adhesive stains? Below are detailed instructions for effectively removing remaining window film adhesive from glass or cars:

Using a hard brush and cooking oil to remove heat-insulating film adhesive from the surface of car glass is quite common. Apply a small amount of cooking oil to the glue stain and let it absorb for a short time. Then, use a stiff brush to gently scrub until all the glue peels off.

Using cellophane is also an effective way to remove remaining window film adhesive. You just need to place the cellophane on the area with glue and press it firmly, then quickly pull the paper out, the glue will follow the cellophane. Continue doing this until all the glue on the surface has been removed.

Boiling water is also an effective way to remove remaining window film adhesive from car windows. You just need to pour boiling water on the glued surface and let it cool for a few minutes. Then, use a soft cloth or brush to remove the glue. Boiling water will soften the glue making it easier to remove.

Isopropyl alcohol is a very strong cleaning agent suitable for removing window film adhesive left over from car windows. You can pour alcohol onto a clean cloth and wipe it evenly over the glued area. Finally, use a gauze or dry towel to wipe off the film adhesive.
Note:  You need to be careful when using this alcohol because it is a substance that can cause poisoning when absorbed through the skin, inhaled or swallowed.

A mixture of baking soda and coconut oil can also effectively remove the layer of  remaining window film adhesive on car windows. You can mix these two ingredients into a mixture and then apply it to the glued surface. Then, let it absorb for a few minutes, then use a stiff brush to remove the glue.

If you want to remove leftover window film adhesive from glass or cars, refer to specialized products available on the market. You can choose a reputable product to help you remove glue as quickly as possible.

Star Insulation Film Company is proud to be a supplier of Ntech and CeraMAX insulation film products from Korea and Global - TOP 1 USA insulation film with high quality and best installation service.
 

See CeraMAX product information at: https://ceramax.com.vn/
 

See Ntech product information at: https://ntechfilm.com.vn/
 

See Global product information at: https://www.globalwindowfilms.com.vn/

Window film not only helps minimize the effects of high temperatures and UV rays but also effectively saves the vehicle's fuel, especially on hot summer days.
For advice and answers to all questions, please contact the information below:
Hotline: 1900 63 36 45
Address:
- Head office: No., Bac Tu Liem District, Hanoi City, Vietnam
- Da Nang Branch: No. 106 Duy Tan, Hoa Thuan Tay Ward, Hai Chau District
- Ho Chi Minh Branch: No. 590/E6 Cach Mang Thang Tam Street, Ward 11, District 3
- Can Tho Branch: No. 36-37 Nguyen De Street, An Thoi Ward, Binh Thuy District